Steps to Choose the Right Railing for You:
-
- Choose your Railing profile; Flat or Peaked.
- Horizontal
- Three Line
- Stair
- Radius
- Radius Stair
- Mahogany Cap
- Choose your Railing profile; Flat or Peaked.
- Choose the total Railing height and the corresponding Baluster or Decorative Panel height.
- Choose your Baluster profile and the desired width.
- Square
- Chamfered
- Turned A
- Turned B
- 1/4″ x 4″ Glass Balusters also available.
- For 1 1/4″ Square Balusters go to Rail Kits; for other Baluster profiles choose Rail Sets.
- Newel Post Sleeves for the Standard Series are Plain and come in 5″ wide with a 6 3/4″ Newel Cap and in 6 1/2″ wide with a 8 1/4″ Newel Cap.
Standard Series Horizontal Rail Kits
Includes
Standard Series Horizontal Rail Kits
Include: Horizontal Rails, Structural Reinforcements, 1 1/4″ Square Balusters, Screws, Hardware and Crush Blocks.
Rail Tops are Flat or Peaked, Rail width is 3 1/2″ and total Rail Section heights are 36″ or 42″.
Rail Sections come in 6′, 8′ and 10′ lengths.
For anything other than 1 1/4″ Square Balusters choose Horizontal Rail Set.
- Height
- Width
- Length
- 36"
- 3 1⁄2"
- 72"
- 42"
- 3 1⁄2"
- 72"
- 36"
- 3 1⁄2"
- 96"
- 42"
- 3 1⁄2"
- 96"
- 36"
- 3 1⁄2"
- 120"
- 42"
- 3 1⁄2"
- 120"
- 36"
- 3 1⁄2"
- 72"
- 42"
- 3 1⁄2"
- 72"
- 36"
- 3 1⁄2"
- 96"
- 42"
- 3 1⁄2"
- 96"
- 36"
- 3 1⁄2"
- 120"
- 42"
- 3 1⁄2"
- 120"
Filter Products
Standard Series Horizontal Rail Sets
Includes
Horizontal Rails, Structural Reinforcements, Screws, Hardware and Crush Blocks. No Balusters included in these Sets!
Rail Tops are Flat or Peaked and width is 3 1/2″.
Rail Runs come in 6′, 8′ and 10′ lengths.
Use with Square, Chamfered or Turned Balusters, with Decorative Panels or with Glass Balusters.
Filter Products
Standard Series Balusters
Square, Chamfered and Turned profiles, 1 1/4″, 1 1/2″ or 1 7/8″ wide and 29 3/4″ or 35 3/4″ high.
- Height
- Width
- Maximum Repeat
- 18"
- 1 7⁄8"
- 4 13⁄18"
- 26"
- 3"
- 5"
- 22"
- 5 1⁄2"
- 7 1⁄2"
- 28"
- 6 3⁄4"
- 8 7⁄8"
- 18"
- 1 7⁄8"
- 4 13⁄18"
- 26"
- 3"
- 5"
- 22"
- 5 1⁄2"
- 7 1⁄2"
- 28"
- 6 3⁄4"
- 8 7⁄8"
- 18"
- 1 7⁄8"
- 4 13⁄18"
- 26"
- 3"
- 5"
- 22"
- 5 1⁄2"
- 7 1⁄2"
- 28"
- 6 3⁄4"
- 8 7⁄8"
- 18"
- 1 7⁄8"
- 4 13⁄18"
- 26"
- 3"
- 5"
- 22"
- 5 1⁄2"
- 7 1⁄2"
- 28"
- 6 3⁄4"
- 8 7⁄8"
- 18"
- 1 7⁄8"
- 4 13⁄18"
- 26"
- 3"
- 5"
- 22"
- 5 1⁄2"
- 7 1⁄2"
- 28"
- 6 3⁄4"
- 8 7⁄8"
- 18"
- 1 7⁄8"
- 4 13⁄18"
- 26"
- 3"
- 5"
- 22"
- 5 1⁄2"
- 7 1⁄2"
- 28"
- 6 3⁄4"
- 8 7⁄8"
- 18"
- 1 7⁄8"
- 4 13⁄18"
- 26"
- 3"
- 5"
- 22"
- 5 1⁄2"
- 7 1⁄2"
- 28"
- 6 3⁄4"
- 8 7⁄8"
- 18"
- 1 7⁄8"
- 4 13⁄18"
- 26"
- 3"
- 5"
- 22"
- 5 1⁄2"
- 7 1⁄2"
- 28"
- 6 3⁄4"
- 8 7⁄8"
- 18"
- 1 7⁄8"
- 4 13⁄18"
- 26"
- 3"
- 5"
- 22"
- 5 1⁄2"
- 7 1⁄2"
- 28"
- 6 3⁄4"
- 8 7⁄8"
- 18"
- 1 7⁄8"
- 4 13⁄18"
- 26"
- 3"
- 5"
- 22"
- 5 1⁄2"
- 7 1⁄2"
- 28"
- 6 3⁄4"
- 8 7⁄8"
- 18"
- 1 7⁄8"
- 4 13⁄18"
- 26"
- 3"
- 5"
- 22"
- 5 1⁄2"
- 7 1⁄2"
- 28"
- 6 3⁄4"
- 8 7⁄8"
- 18"
- 1 7⁄8"
- 4 13⁄18"
- 26"
- 3"
- 5"
- 22"
- 5 1⁄2"
- 7 1⁄2"
- 28"
- 6 3⁄4"
- 8 7⁄8"
- 18"
- 1 7⁄8"
- 4 13⁄18"
- 26"
- 3"
- 5"
- 22"
- 5 1⁄2"
- 7 1⁄2"
- 28"
- 6 3⁄4"
- 8 7⁄8"
- 18"
- 1 7⁄8"
- 4 13⁄18"
- 26"
- 3"
- 5"
- 22"
- 5 1⁄2"
- 7 1⁄2"
- 28"
- 6 3⁄4"
- 8 7⁄8"
- 18"
- 1 7⁄8"
- 4 13⁄18"
- 26"
- 3"
- 5"
- 22"
- 5 1⁄2"
- 7 1⁄2"
- 28"
- 6 3⁄4"
- 8 7⁄8"
- 18"
- 1 7⁄8"
- 4 13⁄18"
- 26"
- 3"
- 5"
- 22"
- 5 1⁄2"
- 7 1⁄2"
- 28"
- 6 3⁄4"
- 8 7⁄8"
- 18"
- 1 7⁄8"
- 4 13⁄18"
- 26"
- 3"
- 5"
- 22"
- 5 1⁄2"
- 7 1⁄2"
- 28"
- 6 3⁄4"
- 8 7⁄8"
- 18"
- 1 7⁄8"
- 4 13⁄18"
- 26"
- 3"
- 5"
- 22"
- 5 1⁄2"
- 7 1⁄2"
- 28"
- 6 3⁄4"
- 8 7⁄8"
- 29 3⁄4"
- 1 1⁄2"
- 4 3⁄4"
- 35 3⁄4"
- 1 1⁄2"
- 4 3⁄4"
- 29 3⁄4"
- 2"
- 4 13⁄16"
- 35 3⁄4"
- 2"
- 4 13⁄16"
- 35 3⁄4"
- 1 1⁄2"
- 4 3⁄4"
- 35 3⁄4"
- 2"
- 4 13⁄16"
Filter Products
Standard Series Decorative Panels
Choose from 5 different designs, 29 3/4″ or 35 3/4″ high. We can make custom designs too.
Standard Series Newel Caps
Flat and Peaked Newel Caps, 6 3/4″ or 8 1/4″ wide. Flat also comes in Mahogany.
Filter Products
Standard Series Three Line Rail Kits
Includes
Horizontal Rails, Structural Reinforcements, 1 1/4″ Square Balusters, Screws, Hardware and Crush Blocks.
Rail Tops are Flat or Peaked, Rail width is 3 1/2″ and total Rail Section heights are 36″ or 42″.
In a three-line configuration the Flat Top Rail is used for the middle rail.
Rail Sections come in 6′, 8′ and 10′ lengths.
- Height
- Width
- Length
- 36"
- 3 1⁄2"
- 72"
- 42"
- 3 1⁄2"
- 72"
- 36"
- 3 1⁄2"
- 96"
- 42"
- 3 1⁄2"
- 96"
- 36"
- 3 1⁄2"
- 120"
- 42"
- 3 1⁄2"
- 120"
- 36"
- 3 1⁄2"
- 72"
- 42"
- 3 1⁄2"
- 72"
- 36"
- 3 1⁄2"
- 96"
- 42"
- 3 1⁄2"
- 96"
- 36"
- 3 1⁄2"
- 120"
- 42"
- 3 1⁄2"
- 120"
Filter Products
Standard Series Radius Rail Sets
Includes
Horizontal Rails, Structural Reinforcements, Screws, Hardware and Crush Blocks. No Balusters included in these Sets!
Rail Tops are Flat or Peaked and width is 3 1/2″.
Horizontal Rails bent to radius. Length given is the arc length.
Rail Runs come in 6′, 8′ and 10′ lengths.
Use with Square, Chamfered or Turned Balusters, with Decorative Panels or with Glass Balusters.
Filter Products
Standard Series Stair Rail Kits
Includes
Horizontal Rails, Structural Reinforcements, 1 1/4″ Square Balusters, Screws, Hardware and Crush Blocks.
Rail Tops are Flat or Peaked, Rail width is 3 1/2″ and total Rail Section height is 36″.
Use this Kit to make a sloped section for Stairs.
Rail Sections come in 6′ and 8′ lengths.
Filter Products
Standard Series Radius Stair Rail Sets
Includes
Horizontal Rails, Structural Reinforcements, Screws, Hardware and Crush Blocks. No Balusters included in these Sets!
Rail Tops are Flat or Peaked and width is 3 1/2″.
Rails bent to rake radius for stair application. Length given is the arc length.
Rail Runs come in lengths of 6′ and 8′.
Use with Square, Chamfered or Turned Balusters.
Filter Products
Standard Series Top Rail Caps
Mahogany Top Rail Cap designed to replace the standard PVC Cap.
Caps come in 6′, 8′ and 10′ lengths.
