PVC Railings – Value Series
Steps to Choose the Right Railing for You:
- Choose your Railing top; 3 1/2″ wide, or Graspable 2 3/4″ wide, which is IRC Code R311.7.8.3 compliant.
- Horizontal
- Stair
- Radius
- Choose the total Railing height and the corresponding Baluster or Decorative Panel height.
- The Value Series uses a 1 1/4″ Square Baluster. 1/4″ x 4″ Glass Balusters are also available.
- Newel Post Sleeves for the Value Series are Plain and come in 5″ wide with a 6 3/4″ Newel Cap and in 6 1/2″ wide with a 8 1/4″ Newel Cap.
Value Series Horizontal Rail Kits
Includes
Horizontal Rails, Structural Reinforcements, 1 1/4″ Square Balusters, Screws, Hardware and Crush Blocks.
Rail Tops are 3 1/2″ wide, or Graspable 2 3/4″ wide, which is IRC Code R311.7.8.3 compliant.
Total Rail Section heights are 36″ or 42″ and Sections come in 6′, 8′ and 10′ lengths.
- Height
- Width
- Length
- Uses
- 36"
- 3 1⁄2"
- 72"
- 42"
- 3 1⁄2"
- 72"
- 36"
- 3 1⁄2"
- 96"
- 42"
- 3 1⁄2"
- 96"
- 36"
- 3 1⁄2"
- 120"
- 42"
- 3 1⁄2"
- 120"
- 36"
- 2 3⁄4"
- 72"
- Graspable
- 42"
- 2 3⁄4"
- 72"
- Graspable
- 36"
- 2 3⁄4"
- 96"
- Graspable
- 42"
- 2 3⁄4"
- 96"
- Graspable
- 36"
- 2 3⁄4"
- 120"
- Graspable
- 42"
- 2 3⁄4"
- 120"
- Graspable
Filter Products
Value Series Horizontal Rail Sets
Includes
Horizontal Rails, Structural Reinforcements, Screws, Hardware and Crush Blocks. No Balusters included in these Sets!
Rail Tops are 3 1/2″ wide, or Graspable 2 3/4″ wide, which is IRC Code R311.7.8.3 compliant.
Rail Runs come in 6′, 8′ and 10′ lengths.
Use with Decorative Panels or with Glass Balusters.
Filter Products
Value Series Balusters
1 1/4″ Square Balusters, 31″ or 37″ high.
Filter Products
Value Series Decorative Panels
Choose from 5 different designs, 27 11/16″ or 33 11/16″ high. We can make custom designs too.
Value Series Newel Caps
Flat and Peaked Newel Caps, 6 3/4″ or 8 1/4″ wide. Flat also comes in Mahogany.
Filter Products
Value Series Stair Rail Kits
Includes
Horizontal Rails, Structural Reinforcements, 1 1/4″ Square Balusters, Screws, Hardware and Crush Blocks.
Rail Tops are 3 1/2″ wide, or Graspable 2 3/4″ wide, which is IRC Code R311.7.8.3 compliant.
Total Rail Section height is 36″ and Sections come in 6′, 8′ and 10′ lengths.
Use this Kit to make a sloped section for Stairs.
Filter Products
Value Series Radius Rail Sets
Includes
Horizontal Rails, Structural Reinforcements, Screws, Hardware and Crush Blocks. No Balusters included in these Sets!
Rail Tops are 3 1/2″ wide, or Graspable 2 3/4″ wide, which is IRC Code R311.7.8.3 compliant.
Horizontal Rails bent to radius. Length given is the arc length.
Rail Runs come in 6′, 8′ and 10′ lengths.
Use with Square Balusters, with Decorative Panels or with Glass Balusters.
